From: "Rod" <Rod@derbyshire-rentals.co.uk>
To: "keith butler" <k_butler@blueyonder.co.uk>
Date: Sun, 27 Sep 2009 12:28:35 +0100
MIME-Version: 1.0
Subject: Re: Speedo converter
Reply-to: Rod@derbyshire-rentals.co.uk
Message-ID: <4ABF5A73.8887.6104CFA@Rod.derbyshire-rentals.co.uk>
Priority: normal
In-reply-to: <004f01ca3608$b39eaf80$0201a8c0@main>
References: <4AAF7884.5741.4890B6A@Rod.derbyshire-rentals.co.uk>, <004f01ca3608$b39eaf80$0201a8c0@main>
Content-description: Mail message body
Content-Type: multipart/mixed; boundary="=======AVGMAIL-70892957======="


--=======AVGMAIL-70892957=======
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7BIT

Hi Keith,
The converter works a treat though non of your diagrams is the same as the Caldina GT-T

If you want to add the details:
On the Blue connector behind the speedo/tacho assembly, 
Pin 1 (White/Black wire) = 0v to widget black wire
Pin 3 (red/purple wire)    = +12 to widget red wire
Pin 4 (Blue/white wire)  = input to speedo connect pin to widget grey
Pin5 (Purple wire) = output to gearbox and steering ecus. remove wire and connect it to Blue/white wire which used to go to 
pin4 and widget yellow wire.

Hope that makes sense
Thanks again,
Rod

From:           	"keith butler" <k_butler@blueyonder.co.uk>
To:             	<Rod@derbyshire-rentals.co.uk>
Subject:        	Re: Speedo converter
Date sent:      	Tue, 15 Sep 2009 14:30:33 +0100

Hi Rod
Has 2 output both at same converted frequency one is capacitance coupled the 
other is open collector
I have no instructions for your car however you can find other car fitting 
instructions on my website
www.kbtv.info
Thanks keith
----- Original Message ----- 
From: "Rod" <Rod@derbyshire-rentals.co.uk>
To: <keith@kbtv.co.uk>
Sent: Tuesday, September 15, 2009 11:20 AM
Subject: Speedo converter


> Hi,
> looking at your unit on ebay (item 400060708225), Does it have an output
> for the auto gearbox/power steering? I'm fitting to a Toyota Caldina GT-T. 
> I
> did one last year and bought a module from SVAparts which only had a
> single output and no instructions covering my speedo assembly. - it didn't
> change gear before the rev limiter kicked in and the steering was odd. I 
> got
> no support from the seller so ended up with the car on bricks poking about
> with an oscilloscope till I'd worked out what it needed to make it work, 
> now I
> can't find where I wrote the results down so it would be nice to be able 
> to just
> connect a widget with enough wires to this new car.
> Thanks
> Rod
>
>


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.409 / Virus Database: 270.13.98/2371 - Release Date: 09/14/09 
17:52:00



--=======AVGMAIL-70892957=======
Content-Type: multipart/alternative; 
	boundary="=======AVGMAIL-30B43F71======="

--=======AVGMAIL-30B43F71=======
Content-Type: text/plain; x-avg=cert; charset=us-ascii
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline
Content-Description: "AVG certification"


No virus found in this incoming message.
Checked by AVG - www.avg.com 
Version: 8.5.409 / Virus Database: 270.14.3/2414 - Release Date: 10/04/09 18=
:42:00

--=======AVGMAIL-30B43F71=======--
--=======AVGMAIL-70892957=======--